Draytek Vigor 2820 Series User Manual

i Vigor2820 Series ADSL2/2+ Security Firewall Quick Start Guide Version: 1.0 Date: 2007/07/24

611..11..33 FFoorr VViiggoorr22882200VVnn LED Status Explanation Blinking The router is powered on and running normally. ACT (Activity) Off

7 Interface Description WLAN Push this button to enable (WLAN LED on) or disable (WLAN LED off) wireless connection. Factory Reset Restore the

811..11..44 FFoorr VViiggoorr22882200VVSS LED Status Explanation Blinking The router is powered on and running normally. ACT (Activity) Off

9On The port is connected. Off The port is disconnected. Left LED (Green) Blinking The data is transmitting. On The port is connected with 1000M

1011..11..55 FFoorr VViiggoorr22882200VVSSnn LED Status Explanation Blinking The router is powered on and running normally. ACT (Activity) Of

11Blinking The data is transmitting. On The port is connected with 1000Mbps. Right LED (Green) Off The port is disconnected with 10/100Mbps. On

1211..22 PPaacckkaaggee CCoonntteenntt nQuick Start Guide oCD p RJ-45 Cable (Ethernet) q RJ-45 to RJ-45 Cable for S models r ISDN Phon

1322.. IInnssttaalllliinngg YYoouurr RRoouutteerr This section will guide you to install the router through hardware connection and configure th

14 Caution: Each of the Phone ports can be connected to an analog phone only. Do not connect the phone ports to the telephone wall jack. Such connec

15 Yet, if the user configures ISDN / Phone S0 as TE Mode in VoIP>> Phone Settings, the green LED will light on to indicate ISDN-TE is selecte

i Copyright Information Copyright Declarations Copyright 2007 All rights reserved. This publication contains information that is protected by copyri

1622..33 PPrriinntteerr IInnssttaallllaattiioonn You can install a printer onto the router for sharing printing. All the PCs connected this route

173. Open File->Add a New Computer. A welcome dialog will appear. Please click Next. 4. Click Local printer attached to this computer and

186. In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port nam

199. Now, your system will ask you to choose right name of the printer that you installed onto the router. Such step can make correct driver loaded

20The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router. Note 1: Some prin

2133.. CCoonnffiigguurriinngg WWeebb PPaaggeess To access Internet, please finish basic configuration after completing the hardware installation

22Note: The home page will change slightly in accordance with the router you have. 4. Enter the login password on the field of New Password and ret

236. On the next page as shown below, please select the appropriate Internet access type according to the information from your ISP. For example, y

241483 Bridged IP /1483 Routed IP: if you choose 1483 Bridged IP / 1483 Routed IP as the protocol, you will get the following page. Please type in t

2533..22 WWiirreelleessss CCoonnffiigguurraattiioonn  For the user of Vigor2820/2820VS, please skip this section. For operating Vigor2820n/Vn/VS

ii European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, T

26 2. Check Enable Wireless LAN to enable the wireless function. 3. At present, the router can connect to 11b+11g, 11g Only, 11b Only, 11n Only an

2733..22..33 SSeeccuurriittyy SSeettttiinnggss 1. On the Wireless LAN group, select Security Settings. 2. Select an appropriate encryption mo

28field of Pre-Shared Key (PSK). WPA encrypts each frame transmitted from the radio using the Pre-Shared Key (PSK) which entered from this panel.

2944.. TTrroouubbllee SShhoooottiinngg This section will guide you to solve abnormal situations if you cannot access into the Internet after inst

3044..22 CChheecckkiinngg IIff tthhee NNeettwwoorrkk CCoonnnneeccttiioonn SSeettttiinnggss oonn YYoouurr CCoommppuutteerr IIss OOKK oorr

314. Select Obtain an IP address automatically and Obtain DNS server address automatically. FFoorr MMaaccOOss 1. Double click on the current us

3244..33 PPiinnggiinngg tthhee RRoouutteerr ffrroomm YYoouurr CCoommppuutteerr The default gateway IP address of the router is 192.168.1.1. F

33 44..44 CChheecckkiinngg IIff tthhee IISSPP SSeettttiinnggss aarree OOKK oorr NNoott Open WAN >> Internet Access page and then ch

34

35FFoorr MMPPooAA UUsseerrss 1. Check if the Enable option is selected. 2. Check if DSL Modem Settings is set appropriately. 3. Check if IP

iii TTaabbllee ooff CCoonntteennttss 1. Introduction...

36 HHaarrddwwaarree RReesseett While the router is running (ACT LED blinking), press the RST button and hold for more than 5 seconds. When you see

3744..66 CCoonnttaaccttiinngg YYoouurr DDeeaalleerr If the router still cannot work correctly after trying many efforts, please contact your dea

111.. IInnttrroodduuccttiioonn The Vigor2820 is an ADSL2+ router with 2nd Ethernet WAN. This 2nd WAN can connect to DSL/Cable modem or fiber media

211..11 PPaanneell EExxppllaannaattiioonn 11..11..11 FFoorr VViiggoorr22882200 LED Status Explanation Blinking The router is powered on an

3 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep

411..11..22 FFoorr VViiggoorr22882200nn LED Status Explanation Blinking The router is powered on and running normally. ACT (Activity) Off Th

5 Interface Description WLAN Push this button to enable (WLAN LED on) or disable (WLAN LED off) wireless connection. Factory Reset Restore th