Draytek Vigor 2950 User Manual Page 118
- Page / 137
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Telnet Command Reference Guide V1.1
112
2.23.5 voip sip
2.23.5.1 voip sip acc
This command allows users to set SIP account.
voip sip acc n [-<command><parameter>]
voip sip acc n[…]
Syntax Description
n It means the index number of the VoIP settings.
-<command><parameter> The available commands with parameters are listed below:
-p<profile> It means the name of the account profile (maximum 11
characters).
-r 0/1/2/3 It means registration mode.
0: none
1: auto
2: WAN
3: LAN/VPN
-o<port> It means to set the port number for sending/receiving SIP
message for building a session. The default value is 5060.
-d<domain> It means to set the domain name or IP address of the SIP
Registrar server. The maximum is 63 characters.
-y<proxy> It means to set domain name or IP address of SIP proxy server.
The maximum is 63 characters.
-b 0/1 It means to enable/disable SIP account outbound proxy. 0 means
Disable; and 1 means Enable.
-s 0/1 It means to enable/disable the locating SIP server. 0 means
Disable; and 1 means Enable.
-N<name> It means to set the display name for SIP account. The maximum
is 23 characters.
-n<number> It means to set the number for the SIP account. The maximum is
63 characters.
-a<id> It means to set an ID used for authentication. The maximum is
63 characters.
-A 0/1 It means to enable/disable the usage of SIP authentication ID. 0
means Disable; and 1 means Enable.
-p <passwd> It means to set the password of the SIP account. The maximum
is 63 characters.
-e <sec> It means to set the expiry time for the SIP account. The default
value is 3600 seconds.
-w 0/1 It means to enable/disable phone call without register. 0 means
Disable; and 1 means Enable.
- DrayTek Telnet Commands 1
- Reference Guide 1
- Copyright Information 2
- 1.1 Accessing Telnet 7
- 1.2 Valid Commands 8
- 2.1 upnp 9
- 2.1.3 upnp nat 10
- 2.1.4 upnp service 10
- 2.1.5 upnp subscribe 11
- 2.1.6 upnp tmpvs 12
- 2.2 ddns 13
- 2.3 exit 13
- 2.4.1 ip 2ndsubnet 14
- 2.4.2 ip 2ndaddr 15
- 2.4.3 ip 2ndmask 16
- 2.4.4 ip aux 17
- 2.4.5 ip addr 18
- 2.4.6 ip arp 19
- 2.4.7 ip dhcpc 20
- 2.4.8 ip ping 21
- 2.4.9 ip tracert 22
- >ip telnet 192.168.1.1 3 23
- 2.4.10 ip rip 24
- 2.4.11 ip route 25
- 2.4.12 ip igmp_proxy 26
- 2.4.13 ip wanaddr 27
- 2.4.14 ip wan2addr 28
- >ip dmzswitch off 30
- 2.4.19 ip session 31
- 2.4.20 ip bandwidth 32
- 2.4.21 ip bindmac 33
- 2.5 ipf 34
- 2.6 p2p 38
- 2.9 ddos 42
- 2.10 urlf 43
- 2.10.2 urlf setdefault 44
- 2.10.3 urlf esubnet 45
- 2.10.4 urlf webf 46
- 2.10.5 urlf tschedule 47
- 2.11 isdn 48
- 2.11.2 isdn dial 49
- 2.11.3 isdn drop 50
- 2.11.4 isdn vci 50
- 2.11.5 isdn overlap 50
- 2.12 log 51
- 2.13 quit 52
- 2.14 srv 53
- 2.14.2 srv nat 58
- > srv nat openport flush 59
- 2.14.3 srv vta 61
- 2.15 show 62
- 2.15.5 show dns 63
- 2.15.6 show openport 63
- 2.15.7 show nat 63
- 2.15.8 show session 64
- 2.15.9 show adsl 64
- 2.16 mngt 65
- 2.16.3 mngt httpsport 66
- 2.16.4 mngt telnetport 66
- 2.16.5 mngt ftpserver 67
- 2.16.6 mngt noping 68
- 2.16.7 mngt defenseworm 69
- 2.16.8 mngt rmtcfg 70
- 2.16.9 mngt echoicmp 71
- 2.16.10 mngt accesslist 72
- 2.17 sys 73
- 2.17.2 sys cfg 74
- 2.17.3 sys cmdlog 75
- 2.17.4 sys ftpd 76
- 2.17.5 sys domainname 77
- 2.17.6 sys iface 78
- 2.17.7 sys name 79
- 2.17.8 sys passwd 80
- 2.17.9 sys reboot 81
- 2.17.10 sys commit 82
- 2.17.11 sys tftpd 83
- 2.17.12 sys cc 83
- 2.17.13 sys version 84
- 2.17.14 sys qrybuf 85
- 2.17.15 sys pollbuf 86
- 2.17.16 sys sip_alg 87
- 2.18 register 88
- 2.19 vpn 89
- 2.19.2 vpn 2ndsubnet 90
- 2.20 wan 91
- 2.20.3 wan ppp_mss 92
- 2.20.4 wan DF_check 92
- 2.20.5 wan disable 92
- 2.21 adsl 93
- 2.21.2 adsl rxpct 94
- 2.21.3 adsl status 95
- 2.21.4 adsl ppp 96
- 2.21.6 adsl idle 98
- 2.21.7 adsl reboot 98
- 2.21.8 adsl oamlb 99
- 2.21.9 adsl vcilimit 100
- > adsl codinggain 102
- Coding gain=3db 102
- > adsl maxdnrate 3M 103
- Value=101, about 3Mbps 103
- > adsl duallatency 1 104
- Dual Latency: = Enable 104
- 2.21.15 adsl savecfg 105
- 2.22 wl 106
- > wl act on 107
- 2.22.3 wl wpa 108
- > wl pwrtst on 109
- % Wl pwrtst is Enabled! 109
- 2.23 voip 111
- 2.23.2 voip debug 112
- 2.23.3 voip dial_plan 113
- 2.23.4 voip rtp 114
- 2.23.5 voip sip 118
- 2.23.5.2 voip sip calllog 120
- Example 120
- 2.23.6 voip dsp 125
- > port ? 129
- > port 1 AN 129
- 2.25 wol 130
- 2.26 vigbrg 131
- 2.26.2 vigbrg off 132
- 2.26.3 vigbrg status 133
- 2.26.4 vigbrg cfgip 134
- 2.26.5 vigbrg wanstatus 135
- 2.26.6 vigbrg wlanstatus 136
Related products and manuals for Mice Draytek Vigor 2950
Mice Draytek Vigor 2950Gi User Manual
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 0.970 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals