Draytek Vigor2760Vn Installation Guide download pdf (Page 16)

Vigor2760 Series Quick Start Guide

(

)

1. Make sure your PC connects to the router correctly.

Normally, your computer will get its IP address dynamically from

the router (using ‘DHCP’), otherwise you must set the PCs IP

address to be in the same IP subnet as the router (e.g.

192.168.1.2).

The default IP address of the Vigor 2760 router

is 192.168.1.1.

2. Open a web browser on your PC and type http://192.168.1.1.

3. The following prompt will ask for the router’s username and password.

The default is “admin/admin” for Username/Password. The click Login

to open the web user interface (WUI).

Note: The default password of ‘admin’ should be changed at

your earliest opportunity (from the router’s system maintenance

menu), but don’t forget what you change it to otherwise you

will not be able to access the router’s configuration/WUI.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

No comments

Draytek Vigor2760Vn Installation Guide Page 16