Draytek Vigor2910 Series User Manual

TheGreenBow IPSec VPN Client Configuration Guide

f. Select appropriate encryption algorithms in the IPSec Security Method field. This setup is for phase 2. Note: By default Vigor accepts all the at

3.2 TheGreenBow IPSec VPN Client Configuration 3.2.1 VPN Client Phase 1(IKE) Configuration a. In the "Interface" field, you can selec

3.2.2 VPN Client Phase 2(IPSec) Configuration a. In the "VPN Client address" field, you may define a static virtual IP address here. You

3.2.3 Open the IPSec VPN tunnels Once both Vigor 2910 router and TheGreenBow IPSec VPN Client have been configured accordingly, you ar

4 VPN IPSec Troubleshooting 4.1 « PAYLOAD MALFORMED » error 114920 Default (SA BEFVP41-P1) SEND phase 1 Main Mode [SA][VID] 114920 Default (SA B

4.5 « NO PROPOSAL CHOSEN » error 115911 Default (SA BEFVP41-P1) SEND phase 1 Main Mode [SA][VID] 115913 Default (SA BEFVP41-P1) RECV phase 1 Main

• Check the “default gateway” value in VPN Server LAN. A target on your remote LAN can receive pings but does not answer because there is a no “Defaul

Table of contents 1 Introduction……………………………………………………………………… 1.1 Goal of this document 1.2 VPN network topology 2

1 Introduction 1.1 Goal of this document This VPN configuration guide describes how to configure TheGreenBow IPSec VPN Client with a Vigor 2910 r

2 IPSec Main Mode Configuration 2.1 Vigor 2910 Configuration This section describes how to build an IPSec VPN configuration(Main mode) with yo

f. Select appropriate encryption algorithms in the IPSec Security Method field. This setup is for phase 2. Note: By default Vigor accepts all the at

2.2 TheGreenBow IPSec VPN Client Configuration 2.2.1 VPN Client Phase 1(IKE) Configuration a. In the "Interface" field, you can selec

2.2.2 VPN Client Phase 2(IPSec) Configuration a. In the "VPN Client address" field, you may define a static virtual IP address here. You

2.2.3 Open the IPSec VPN tunnels Once both Vigor 2910 router and TheGreenBow IPSec VPN Client have been configured accordingly, you ar

3 IPSec Aggressive Mode Configuration 3.1 Vigor 2910 Configuration This section describes how to build an IPSec VPN configuration(Aggressive m