Draytek Vigor 2820 Series User Manual download pdf (Page 15)

Blinking The data is transmitting.

On The port is connected with 1000Mbps. Right LED

(Green)

Off The port is disconnected with 10/100Mbps.

On The port is connected.

Off The port is disconnected.

Left LED

(Green)

Blinking The data is transmitting.

On The port is connected with 100Mbps.

LAN 2/3/4

Right LED

(Green)

Off The port is disconnected with 10Mbps.

On The port is connected.

Off The port is disconnected.

Left LED

(Green)

Blinking The data is transmitting.

On The port is connected with 100Mbps.

WAN 2

Right LED

(Green)

Off The port is disconnected with 10Mbps.

Interface Description

WLAN Push this button to enable (WLAN LED on) or disable (WLAN LED off) wireless

connection.

Factory Reset Restore the default settings.

Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more

than 5 seconds. When you see the ACT LED begins to blink rapidly than usual,

release the button. Then the router will restart with the factory default configuration.

Phone S0 Connecter for ISDN phone(s) only via ISDN phone adapter. Do not connect any

other device to such port or connect ISDN line, otherwise the router might be

damaged.

ISDN/Phone

Connecter for ISDN line or ISDN phone adapter in particular condition. Refer to

section 2.2 for more details.

Phone (1/2) Connecter for PSTN phone.

Line Connector of analog phone for PSTN life line.

LAN (1-4) Connecters for local networked devices.

DSL Connecter for accessing the Internet through ADSL2/2+.

WAN 2 Connecter for remote networked devices.

USB Connecter for a USB device (for 3G USB Modem or printer).

PWR

Connecter for a power adapter.

ON/OFF

Power Switch.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 40 41

Comments to this Manuals

No comments

Draytek Vigor 2820 Series User Manual Page 15

Comments to this Manuals

Related products and manuals for Hardware Draytek Vigor 2820 Series