Draytek VIGOR2130VN Installation Guide download pdf (Page 22)

Vigor2130 Quick Start Guide

To access Internet, please finish basic configuration after completing the hardware

installation.

1. Make sure your PC connects to the router correctly.

Notice: You may either simply set up your computer to get IP dynamically

from the router or set up the IP address of the computer to be the same

subnet as the default IP address of Vigor router 192.168.1.1. For the

detailed information, please refer to the later section - Trouble Shooting of

the guide.

2. Open a web browser on your PC and type http://192.168.1.1. The following window

will be open to ask for username and password.

3. For user mode, do not type any word on the window and click Login for the simple

configuration. Yet, for admin mode, please type “admin/admin” on

Username/Password and click Login for full configuration.

Notice: If you fail to access to the web configuration, please go to “Trouble

Shooting” for detecting and solving your problem.

4. The web page can be logged out according to the chosen condition. The default

setting is Auto Logout, which means the web configuration system will logout after

five minutes without any operation. Change the setting for your necessity.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

No comments

Draytek VIGOR2130VN Installation Guide Page 22