Draytek VIGOR2830 User's Guide download pdf (Page 14)

Vigor2830 Series User’s Guide

LED Status Explanation

Blinking The router is powered on and running normally. ACT (Activity)

Off The router is powered off.

On USB device is connected and ready for use. USB

Blinking The data is transmitting.

CSM On The profile(s) of CSM (Content Security

Management) for IM/P2P, URL/Web Content Filter

application is enabled from Firewall >>General

Setup. (Such profile must be established under

CSM menu).

Wireless access point is ready.

WLAN

Blinking

It will blink slowly while wireless traffic goes

through.

If ACT and WLAN LEDs blink quickly and

simultaneously when WPS is working, and it will

return to normal condition after two minutes. (You

need to setup WPS within 2 minutes.)

On The router is ready to access Internet through DSL

link.

DSL

Blinking Slowly: The DSL connection is ready.

Quickly: The connection is tranning.

On The WAN2 connection is ready. WAN2

Blinking It will blink while transmitting data.

On The DoS/DDoS function is active. DoS

Blinking It will blink while an attack is detected.

VPN On The VPN tunnel is active.

QoS

On The QoS function is active.

LED on Connector

On The port is connected.

Off The port is disconnected.

Left LED

(Green)

Blinking The data is transmitting.

On The port is connected with 1000Mbps.

GigaLAN 1/2/3/4

Right LED

(Green)

Off The port is connected with 10/100Mbps when left

LED is on.

On The port is connected.

Off The port is disconnected.

Left LED

(Green)

Blinking The data is transmitting.

On The port is connected with 1000Mbps.

WAN 2 (Giga)

Right LED

(Green)

Off The port is connected with 10/100Mbps when left

LED is on.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 354 355

Comments to this Manuals

No comments

Draytek VIGOR2830 User's Guide Page 14

Comments to this Manuals

Related products and manuals for Routers Draytek VIGOR2830