Draytek Vigor2920n User's Guide download pdf (Page 236)

Vigor2920 Series User’s Guide

224

Netbios Naming Packet

Pass – Click it to have an inquiry for data transmission

between the hosts located on both sides of VPN Tunnel while

connecting.

Block – When there is conflict occurred between the hosts on

both sides of VPN Tunnel in connecting, such function can

block data transmission of Netbios Naming Packet inside the

tunnel.

Multicast via VPN

Some programs might send multicast packets via VPN

connection.

Pass – Click this button to let multicast packets pass through

the router.

Block – This is default setting. Click this button to let

multicast packets be blocked by the router.

User Name

This field is applicable when you select PPTP or L2TP with or

without IPSec policy above.

Password

This field is applicable when you select PPTP or L2TP with or

without IPSec policy above.

Enable Mobile One-Time

Passwords (mOTP)

Check this box to make the authentication with mOTP

function.

PIN Code – Type the code for authentication (e.g, 1234).

Secret – Use the 32 digit-secret number generated by mOTP

in the mobile phone (e.g., e759bb6f0e94c7ab4fe6).

IKE Authentication

Method

This group of fields is applicable for IPSec Tunnels and L2TP

with IPSec Policy when you specify the IP address of the

remote node. The only exception is Digital Signature (X.509)

can be set when you select IPSec tunnel either with or without

specify the IP address of the remote node.

Pre-Shared Key - Check the box of Pre-Shared Key to invoke

this function and type in the required characters (1-63) as the

pre-shared key.

Digital Signature (X.509) – Check the box of Digital

Signature to invoke this function and Select one predefined

Profiles set in the VPN and Remote Access >>IPSec Peer

Identity.

IPSec Security Method

This group of fields is a must for IPSec Tunnels and L2TP

with IPSec Policy when you specify the remote node. Check

the Medium, DES, 3DES or AES box as the security method.

Medium-Authentication Header (AH) means data will be

authenticated, but not be encrypted. By default, this option is

invoked. You can uncheck it to disable it.

High-Encapsulating Security Payload (ESP) means payload

(data) will be encrypted and authenticated. You may select

encryption algorithm from Data Encryption Standard (DES),

Triple DES (3DES), and AES.

Local ID - Specify a local ID to be used for Dial-in setting in

the LAN-to-LAN Profile setup. This item is optional and can

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 354 355

Comments to this Manuals

No comments

Draytek Vigor2920n User's Guide Page 236

Comments to this Manuals

Related products and manuals for Routers Draytek Vigor2920n