Draytek Vigor2920n User's Guide download pdf (Page 228)

Vigor2920 Series User’s Guide

216

z When you check IPSec, you will see the following graphic:

Profile Name

Type a name for such profile. The length of the file is

limited to 10 characters.

User Name

This field is used to authenticate for connection when

you select PPTP or L2TP with or without IPSec policy

above.

Password

This field is used to authenticate for connection when

you select PPTP or L2TP with or without IPSec policy

above.

Pre-Shared Key

For IPSec/L2TP IPSec authentication, you have to type a

pre-shared key.

Confirm Pre-Shared Key

Type the pre-shared key again for confirmation.

Digital Signature (X.509)

Check the box of Digital Signature to invoke this

function.

Use the drop down list to choose one of the certificates

for using. You have to configure one certificate at least

previously in Certificate Management >> Local

Certificate. Otherwise, the setting you choose here will

not be effective.

Peer IP/VPN Client IP

Type the WAN IP address or VPN client IP address for

the remote client.

Peer ID

Type the ID name for the remote client.

Remote Network IP

Please type one LAN IP address (according to the real

location of the remote host) for building VPN

connection.

Remote Network Mask

Please type the network mask (according to the real

location of the remote host) for building VPN

connection.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 354 355

No comments

Draytek Vigor2920n User's Guide Page 228