Draytek Vigor2920n User's Guide download pdf (Page 58)

Vigor2920 Series User’s Guide

After finishing all the settings here, please click OK to activate them.

This router supports the function of load balancing. It can assign traffic with protocol type, IP

address for specific host, a subnet of hosts, and port range to be allocated in WAN interface.

The user can assign traffic category and force it to go to dedicate network interface based on

the following web page setup. Twenty policies of load-balance are supported by this router.

Note: Load-Balance Policy is running only when more than one WAN interface is

activated.

Index

Click the number of index to access into the load-balance policy

configuration web page.

Enable

Check this box to enable this policy.

Protocol

Use the drop-down menu to change the protocol for the WAN

interface.

WAN

Use the drop-down menu to change the WAN interface.

Src IP Start

Displays the IP address for the start of the source IP

Src IP End

Displays the IP address for the end of the source IP.

Dest IP Start

Displays the IP address for the start of the destination IP.

Dest IP End

Displays the IP address for the end of the destination IP.

Dest Port Start

Displays the IP address for the start of the destination port.

Dest Port End

Displays the IP address for the end of the destination port.

Move UP/Move Down

Use Up or Down link to move the order of the policy.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 354 355

No comments

Draytek Vigor2920n User's Guide Page 58