Draytek Vigor 2950Gi User's Guide download pdf (Page 55)

igor2930 Series User’s Guide

Index The number (1 to 10) under Index allows you to open next page to

set up static route.

Destination Address Displays the destination address of the static route.

Status Displays the status of the static route.

Viewing Routing Table Displays the routing table for your reference.

Here is an example of setting Static Route in Main Router so that user A and B locating in

different subnet can talk to each other via the router. Assuming the Internet access has been

configured and the router works properly:

z use the Main Router to surf the Internet.

z create a private subnet 192.168.10.0 using an internal Router A (192.168.1.2)

z create a public subnet 211.100.88.0 via an internal Router B (192.168.1.3).

z have set Main Router 192.168.1.1 as the default gateway for the Router A 192.168.1.2.

Before setting Static Route, user A cannot talk to user B for Router A can only forward

recognized packets to its default gateway Main Router.

1. Go to LAN page and click General Setup, select 1st Subnet as the RIP Protocol

Control. Then click the OK button.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 297 298

No comments

Draytek Vigor 2950Gi User's Guide Page 55