Draytek Vigor 2950Gi User's Guide download pdf (Page 194)

Vigor2930 Series User’s Guide

186

Volume Gain Mic Gain (1-10)/Speaker Gain (1-10) - Adjust the volume of

microphone and speaker by entering number from 1- 10. The

larger of the number, the louder the volume is.

MISC Dial Tone Power Level - This setting is used to adjust the

loudness of the dial tone. The smaller the number is, the

louder the dial tone is. It is recommended for you to use the

default setting.

Ring Frequency - This setting is used to drive the frequency

of the ring tone. It is recommended for you to use the default

setting.

DTMF DTMF Mode – There are four DTMF modes for you to

choose.

InBand - Choose this one then the Vigor will send the DTMF

tone as audio directly when you press the keypad on the phone

OutBand - Choose this one then the Vigor will capture the

keypad number you pressed and transform it to digital form

then send to the other side; the receiver will generate the tone

according to the digital form it receive. This function is very

useful when the network traffic congestion occurs and it still

can remain the accuracy of DTMF tone.

SIP INFO- Choose this one then the Vigor will capture the

DTMF tone and transfer it into SIP form. Then it will be sent

to the remote end with SIP message.

Payload Type (rfc2833) - Choose a number from 96 to 127,

the default value was 101. This setting is available for the

OutBand (RFC2833) mode.

MSN Alias You can modify the MSN number (default values are set from

30 – 39) with any number you desire. For example, type 50 in

the box of MSN 30.

Later you will find MSN 30 has been replaced with MSN50 in

all related pages. See the following figures for examples

(pages of VoIP>>SIP Accounts and VoIP>>Phone

Settings).

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 297 298

No comments

Draytek Vigor 2950Gi User's Guide Page 194