Draytek Vigor 2950Gi User's Guide download pdf (Page 42)

Vigor2930 Series User’s Guide

Detection

Mode – Choose ARP Detect or Ping Detect for the system to

execute for WAN detection.

Ping IP – If you choose Ping Detect as detection mode, you have

to type IP address in this field for pinging.

TTL (Time to Live) – Displays value for your reference. TTL

value is set by telnet command.

MTU

Mean maximum transmission unit of one packet. The default

value is 1442.

PPP/MP Setup PPP Authentication – Select PAP only or PAP or CHAP for

PPP.

Idle Timeout – Set the timeout for breaking down the Internet

after passing through the time without any action. This setting is

active only when the Active on demand option for Active Mode is

selected in WAN>> General Setup page.

IP Address

Assignment Method

(IPCP)

Usually ISP dynamically assigns IP address to you each time you

connect to it and request. In some case, your ISP provides service

to always assign you the same IP address whenever you request.

In this case, you can fill in this IP address in the Fixed IP field.

Please contact your ISP before you want to use this function.

WAN IP Alias - If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use WAN

IP Alias. You can set up to 8 public IP addresses other than the

current one you are using. Notice that this setting is available for

WAN1 only.

Fixed IP – Click Yes to use this function and type in a fixed IP

address in the box of Fixed IP Address.

Default MAC Address – You can use Default MAC Address or

specify another MAC address by typing on the boxes of MAC

Address for the router.

Specify a MAC Address – Type the MAC address for the router

manually.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 297 298

No comments

Draytek Vigor 2950Gi User's Guide Page 42